It’s a project to convert agro forestry waste to Bio coal . Shortly project for Best from waste. In brief we can describe, it is a machinery which is capable of binding any agro-forestry waste in to finished Briquettes / Bio-coal / White coal.
The project is viable where Agro-forestry Waste / Biomass is available with in the surrounding area and can be available in abundant quantity with cheaper rate. Thus project should be economically viable.
Any type of Agro-forestry Waste / Bio-mass can be converted in to Finished Briquettes. i.e. Saw Dust, Ground-nut Shell , Custer Shell , Sugar-cane Baggas, Cotton Stalk , Bamboo Dust , Wheat Husk , Sarsav Husk etc..
Yes, it can run continuously round the clock.
On dry basis to convert biomass into briquettes is 100%, as the process only involves densification.
Size : Up to 20mm, if bigger then cutting is required.
Moisture : Below 10%, if higher then drying is required.
Jumbo-90 production capacity is 1500 Kg / Hr. It may varies +- 15%, which depends on the bulk density of the Raw Material.
High Production Capacity, Law Production Cost, Doesn’t required Powder Making unit, Low Maintenance.
It’s a demandable market in industrial sector rate approx Rs. 2500 Rs. to 3000/MT
The Calorific Value of the Finished Briquettes is Approx 4000 K.cal/Kg. The Calorific Value may varies depends on the different RM used. It can be replace any kind of Coal like Lignite, Fire wood, Steam Coal etc
Yes, Free Income Tax benefits up to 5 years. No any excise Duty on the Plant due to the Renewable Energy Project
One skill operator and five un-skill workers per shift can be easily run the plant.
The suitable land requirement for setting up Briquetting plant requires machine room size as 20 Ft. x 30 Ft. with 12 Ft. height and for raw material procurement it requires 1 acre land.
No, It’s totally pollution free project.
No. It’s a complete binder less technology
As lignin present in the raw material gets converted into liquid form and acts as a natural Binder. Thus it does not require any external binder. Therefore it is known as Binder Less Technology.
Yes, only avoid contact with water & Fire.
The Shape of the finished Briquettes is cylindrical shape with 90 mm diameter and length is approx. 1 ft.
For demonstration, Kindly visit our Regd. Office at Shree Khodiyar Engineering, GIDC Metoda, Rajkot, Gujarat, India
Briquettes have high specific density (1200 Kg/m3) and bulk density (800 Kg/m3) compared to 60 to 180 Kg/m3 of loose biomass.
Briquettes are widely used for any Thermal application where coal can be utilize i.e. steam generation in boilers, heating purpose etc. Briquettes can replace following conventional fuels that are used in mass quantities:
Following industries can make maximum use of briquettes:
Very low ash content as low as 2 to 5% compared to 20% to 40% in coal.
We use Binder less Technology with Mechanical type plant with Ram and die, as it has its own advantages like:
There are 2 types of Briquetting Plant are available depending on the production capacity, i.e.
Super 60 : 600 – 750kg/hr*
Jumbo-90 : 1500kg/hr*
Our Briquetting Plant – Jumbo 90 does not require any powder making units, raw materials residues size up to 1 – 20 mm size can be directly feed
Briquetting Plant requires connected load of 90HP but consumption load is of 75HP.
There are 4 electric motors will be fixed in Briquetting Plant – Jumbo 90.
Average power consumption are around 40 to 45 units / MT at continuous running of Briquetting plant – Jumbo 90.
Yes trained and experienced operators of Shree Khodiyar will train your operator unless your operator will get trained completely about running a plant successfully.
Shree Khodiyar have engaged a huge team of professionals for providing timely and accurate after sales support to our clientele. We always visit all our clients at least twice a year to solve their problems (if any) and also to educate them with updated technologies.